硬质合金加工时需要注意哪些问题？

　　硬质合金加工时需要注意哪些问题？

　　What issues should be paid attention to when machining hard alloys?

　　如果要进行硬质合金加工，那么还是要有完善的设计和加工流程，必须要根据实际情况来进行加工，这样后期的零件才能够满足我们的需求。那么具体硬质合金加工要注意什么呢？下面小编给大家解答一下：

　　If we want to process hard alloy, we still need to have a complete design and processing process, which must be processed according to the actual situation, so that the later parts can meet our needs. So what should be paid attention to in the specific processing of hard alloys? Below, the editor will give you an answer:

　　一、确定设计合理

　　1、 Confirm that the design is reasonable

　　正常加工零件之前都是要先进行模具的设计，如果商家本身手中有3D图纸，那么后期的设计也会相对简单一些。如果没有图纸，那么就要联系专业的厂家来进行硬质合金设计，然后先生产模具，再去进行后期的零件生产和加工，这样才能够保证零件符合要求。

　　Before normal processing of parts, mold design is necessary. If the merchant has 3D drawings in their hands, the later design will also be relatively simple. If there are no drawings, then it is necessary to contact a professional manufacturer to design the hard alloy, then produce the mold first, and then proceed with the later part production and processing, in order to ensure that the parts meet the requirements.

　　二、保证精密度

　　2、 Ensure precision

　　不管是何种类型的零件，其质量都是重点所在。所以一定要注意好钨钢的材质、密度等是否符合我们的需求，零件设计是否符合基本条件要求。而且要保证好其精度，尤其是很多精密度要求比较高的零部件，还是不能随意进行加工的，必须要保证尺寸稳定。

　　Regardless of the type of component, its quality is the key. So we must pay attention to whether the material and density of tungsten steel meet our needs, and whether the part design meets the basic requirements. Moreover, to ensure its accuracy, especially for many components with high precision requirements, they cannot be processed arbitrarily and must ensure dimensional stability.

　　三、厂家售后有保证

　　3、 The manufacturer's after-sales service is guaranteed

　　硬质合金加工一般都是要批量进行，那么还是要和大型厂家合作，要确定好厂家的售后服务。必须要保证零部件的批发加工效率，同时价格方面也要合理才行。性价比高，质量不错的零件才是真正值得我们去使用的。

　　Hard alloy processing generally requires batch production, so it is still necessary to cooperate with large manufacturers and determine their after-sales service. It is necessary to ensure the efficiency of wholesale processing of components, while also ensuring reasonable prices. The parts with high cost-effectiveness and good quality are truly worth using.